solder contacts on both sides of bulkhead 8STA series hermetic feed-through cost and space saving adapted to space-constrained area. no plugs necessary. high performance sealing <1.10 -7 atm.cm 3 /s. designed for high vibration environment. wire soldered on both sides of the feed-through: no plugs needed. heat shrink boot version am44 connector with specif c shell: specif c shell development on demand, please consult us. easy to solder contacts fully tin plated. different contact sizes available.
2 8STA series | hermetic feedthrough description ? solder contacts on both sides of bulkhead ? designed for high vibration environment ? wire soldered on both sides of the feed-through: no plugs needed ? cost and space saving: . adapted to space-constrained area . no plugs necessary ? easy to solder: . contacts fully tin plated . different contact sizes available ? high performance sealing: <1.10 -7 atm.cm 3 /s 35 22#22d service m 12 mechanical ? shell: stainless steel ? shell plating: passivated ? insulator: glass bead ? contact: nickel iron, tin plated electrical ? test voltage: service m: 1300v ? contact resistance: 2 m ? insultation resitance: 5000m (at 500vdc) ? contact rating: size 22d: 3 a environmental ? operating temperature: -55c to +175c ? sealing mated connectors: ip67 (1 meter for 30 min minimum) ? salt spray: 48 hours ? hermeticity: 1.10 -7 cm 3 /s technical features contact layouts (viewed from front face of male insulator) consult us for other layouts or shell sizes.
3 wpn8STAftwusen03 ? copyright souriau dec 2017 - souriau is a registered trademark. all information in this document presents only general particulars and shall not form part of any contract. all rights reserved to souriau for changes without prior notifcation or public announcement. any duplication is prohibited, unless approved in writing. 8STA series | hermetic feedthrough dimension note: all dimensions are in millimeters (mm) size a b c d e f 12 21.70 12.90 23.70 30.85 33.00 22.70 panel cut-out cup for potting 3 max panel thickness viton oring 1.6 max 23.80 max 6 max 11.65 max 9.5 max 3.5 max 25.15 0.5 ?a max ?b min ?c max ?d max ?e max ?f 0.1 cup for potting ordering information note: delivery will contain the cup for potting and the jam nut receptacle not mounted. consult us for other layouts or shell sizes. basic series 8STA 7 y 12 35 199 shell type 7: jam nut receptacle class y: hermetic version shell size 12 contact layout 35 specifcation 199: #22 solder cup contacts on both sides for further information contact us at technical-emear-ect@esterline.com (europe - asia - africa) technical-americas-ect@esterline.com (north america) or visit our web site www.esterline-connection-technologies.com
|
